Report item
Item specifics
  • Brand Name: OXA
  • Operating Voltage: 5V
  • Input Voltage (recommended): 7-12V
  • Input Voltage (limits): 6-20V
  • Digital I/O Pins: 54 (of which 15 provide PWM output)
  • Analog Input Pins: 16
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 256 KB of which 8 KB used by bootloader
  • SRAM: 8 KB
  • Clock Speed: 16 MHz
Product Description

 

0356223d7b555ed

 

 

Features:
The Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Duemilanove or Diecimila.
The Mega 2560 is an update to the Mega, which it replaces.
The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the ATmega16U2 (ATmega8U2 in the revision 1 and revision 2 boards) programmed as a USB-to-serial converter.
Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
Revision 3 of the board has the following new features:
1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
Stronger RESET circuit.
Atmega 16U2 replace the 8U2.
Schematic, Reference Design & Pin Mapping
EAGLE files: -mega2560_R3-reference-design.zip
Schematic: -mega2560_R3-schematic.pdf
Pin Mapping: PinMap2560 page

Specifications:
Microcontroller ATmega2560
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits) : 6-20V
Digital I/O Pins: 54 (of which 15 provide PWM output)
Analog Input Pins: 16
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 256 KB of which 8 KB used by bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16 MHz

Power
The Mega can be powered via the USB connection or with an external power supply. The power source is selected automatically
External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board\'s power jack. Leads from a battery can be inserted in the Gnd and Vin pin headers of the POWER connector.
The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 7 to 12 volts.

Package includes:
1 x ATmega2560-16AU Board
1 x USB Cable

aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()

 

1.We accepte Alipay on Aliexpress.
2.You can pay using Visa, Mastercard, Western Union, Qiwi and Bank Transfer
3.All the payment are accepted through security payment processor ESCROW.
4.Payment must be made within 3 days after place order.

 

 

1.Worldwide Shipping.(Except some countries and APO/FPO address)
2.The orders processed timely after payment verification..
3.We only ship to confirmed order address, your order address Must Match your recipient address.
4.Service Transit Time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
5.If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

 

 

1.We are not responsibility for any important duties, taxes and charges. Please check with your country\'s customs office to determine what these additional costs will be prior to bidding/buying.
2.All emails will be answered within 1 business day. If you do not receive our reply, please kindly resent your email and we will reply to you as soon as possible.
3.Serious buyer only! Please place order only if you agree with all the terms.

 

 

Packaging Details
  • Unit Type: piece
  • Package Weight: 0.18kg (0.40lb.)
  • Package Size: 16cm x 11cm x 11cm (6.30in x 4.33in x 4.33in)
Shipping
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.18kg (0.40lb.)
  • Package Size: 16cm x 11cm x 11cm (6.30in x 4.33in x 4.33in)
Payment
We support the following payment methods. All payments made on AliExpress are processed by Alipay.