Report item
Item specifics
  • Brand Name: CFsunbird
  • is_customized: yes
Product Description

Color classification: red shell Blue shell XY - J03 shell

Shell size: 72.5 * 46.9 * 22.5 wide

The shell weight: 39.1 g a full set of the total weight of 71.2 g



1 road relay module shell delay power disconnect trigger delay Cycle time switch

0.1 seconds (minimum) ~ 999 minutes (maximum) continuous adjustable


With transparent shell, safe and reliable, beautiful and easy!


This product is simple and easy to use, powerful, but please buyer detailed look at our product instructions, very useful products.


Modules window:


1. The wide voltage power supply (6 ~ 30 V) support micro USB 5.0 V power supply, it is very convenient to use;


2. The interface is clear and simple, powerful, easy to understand, almost meet all your needs;


3. There is a button to STOP function (the STOP button), reverse connect protection, reverse connection does not burn;


4. Increase the sleep mode, can make, after 5 minutes without any operation, shut down automatically display; Any key wake up;


5. You can set different OP, CL, LOP parameters, these parameters were independent of each other, are saved;


6. All set parameters automatically saved when power supply drop.





Timing range


0.1 seconds (minimum) ~ 999 minutes (maximum) continuous adjustable


How to choose the timing range:


After mode selection interface parameter values set by short press the STOP button, select the timing range;


XXX. The decimal point in bits, timing range: 1 seconds to 999 seconds


XX. The decimal point in 10 X, the range of timing: 0.1 seconds to 99.9 seconds


X.X.X. decimal point all bright, timing range: 1 ~ 999 minutes


Such as you want to set up the OP is 3.2 seconds, then move the decimal point to 10, 03.2 digital tube display


Parameters: the OP conduction time, CL break time, LOP cycles (1-999 times, "-" represents an infinite loop)


These parameters were independent of each other, but each model sharing these parameters, such as in P1.1 set OP the conduction time is 5 seconds, the user wants to switch to P1.2 mode, then enters P1.2 setting the corresponding parameter, OP will be 5 seconds;


In the main interface (000) shows a short press SET key, will display the OP (CL, LOP) and the corresponding time XXX;


If only the mode of the OP (such as pattern P1.1, P1.2, P1.3) time, the short press SET key will display only the OP and the corresponding time;


If the pattern of the OP, CL, LOP (such as pattern P3.1 P3.2) that short press SET key will display the OP and corresponding time, CL and the corresponding time, LOP and corresponding number;


After setting up model, in the main interface by short press SET key can easily view parameters SET by the current mode, very convenient!


How to set parameters


1. Determine the working mode of the relay;


2. According to the relay working mode, in the main interface (module to electricity, will shine under the current of the working mode (the default P1.1 mode), and then enter the main interface,) "long press SET button 2 seconds to loosen" into the mode selection interface, short press the UP and DOWN buttons to choose to SET UP the mode (P1.1 ~ P - 4);


3. Good choice to SET UP the model (such as P3.2) after short press SET button to SET the corresponding parameter, then to SET UP the parameter will be flashing (OP conduction time, CL break time, LOP cycles (" - "represents an infinite loop)), through UP and DOWN to adjust parameter values, support for long press (rapid increase or decrease) and short press 1 (increase or decrease); Set the parameter value, through the short press the STOP button to select the decimal point position, choose the timing range (the corresponding time of 0.1 seconds ~ 999 minutes). Short press SET key, SET the current mode of one parameter, the above process;


4. SET the parameters of the selected mode, long press SET key after 2 seconds to loosen, the current setting under the good model will flash, and then return to the main interface, SET the parameters of success, is very simple!


Main interface: relay not working status shows "000" (no decimal point), relay work condition with a decimal point, very clear!


Mode selection interface: long press SET button to enter, after the completion of the SET, long press SET key, back to the main interface, very easy!


The STOP button function extension:


Relay enabled mode:


1. ON: OP conduction time relay allows conduction;


2. OFF: relay ban conduction, is always closed;


Short press the STOP button in the main interface, the realization of ON and OFF to switch between the current state of instability, and then return to the main interface. (stop function, and this function is a key disconnect closed relay)


Sleep mode:


1. C - P sleep patterns: five minutes, without any operation, digital tube display will be automatically closed, the normal operation of the program;


2. O - d normal mode: digital tube always open display;


Long press the STOP button for 2 seconds after the release, the realization of the C - P and O - d state switch, the current state of instability, and then return to the main interface.





Packaging Details
  • Unit Type: piece
  • Package Weight: 0.35kg (0.77lb.)
  • Package Size: 10cm x 10cm x 5cm (3.94in x 3.94in x 1.97in)
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.35kg (0.77lb.)
  • Package Size: 10cm x 10cm x 5cm (3.94in x 3.94in x 1.97in)
We support the following payment methods. All payments made on AliExpress are processed by Alipay.